Description
Product characteristics
| Product characteristic | Non Adhesive (NA) | Self Adhesive (SA) |
|---|---|---|
| Item number | 25322 | 25323 |
| Format | 2600x1000x1 mm | 2600x1000x1,2 mm |
| Surface material | PET (Polyethylene terephthalate) | PET (Polyethylene terephthalate) |
| Base material | HIPS (High impact polystyrene) | HIPS (High impact polystyrene) |
| Back side material | - | Adhesive Layer |
| Material thickness mm | 1 mm | 1,2 mm |
| Max. relief height in mm | 1 mm | 1,2 mm |
| Temperature stability in °C | up to 50 °C | up to 50 °C |
| Wet room suitability | limited suitability - remove splash water | limited suitability - remove splash water |
| Abrasion Resistance | Excellent abrasion resistance | Excellent abrasion resistance |
| Rolled packable |
Box (480x480 mm). After receipt, rolled goods should be laid out flat for around 24 hours at room temperature and, if necessary, subjected to additional weight. Rolled with decor side outwardly, max. 6 pcs/box |
Box (480x480 mm). After receipt, rolled goods should be laid out flat for around 24 hours at room temperature and, if necessary, subjected to additional weight. Rolled with decor side inwardly, max. 6 pcs/box |
| Smallest bending radius | 150 mm | 150 mm |
| Weight in kg / piece | 2,7 | 3,1 |
| Pattern Gradient | No design course | No design course |
| Flammability | EN 13501-1 (E) Classification E | EN 13501-1 (E) Classification E |
| Machine-related dimensional and angle tolerances | +/- 2.0 mm in relation to 1,000 mm | +/- 2.0 mm in relation to 1,000 mm |
| Temperature-related dimensional deviations | +/- 0.7 mm to 1,000 mm at temperature change of 10°C | +/- 0.7 mm to 1,000 mm at temperature change of 10°C |
| Protection foil | The product is delivered with a protective film | The product is delivered with a protective film |
| GTIN-Code | 9,00258E+12 | 9,00258E+12 |
| Customs tariff number | 39219090 | 39199080 |
Processing
| Processing | Non Adhesive (NA) | Self Adhesive (SA) |
|---|---|---|
| Cutting | Yes | Yes |
| Punching | Yes | Yes |
| Drilling | Yes | Yes |
| Sawing | Yes supported by a panel | Yes supported by a panel |
| Milling | - | - |
| Laser cutting | - | - |
| Hot bending |
Heat up the SIBU DESIGN sheets from the backside for both, internal and exterior angles. Approximate parameters for material in 1mm thickness: wire temperature: approx. 200°C, heating time: approx. 6-20 seconds - depending on the surface material and bending tool. Hot bending outwardly (decor outside = external angle) possible. Hot bending inwards (decor inside = interior angle) possible. |
|
| Thermoforming | - | - |
| PVA compressible | - | - |
| Digital printing | Samples available for printing tests | Samples available for printing tests |
| Screen printing | Samples available for printing tests | Samples available for printing tests |
Extra equipment
| Extra equipment | Non Adhesive (NA) | Self Adhesive (SA) |
|---|---|---|
| Special formats | On request | On request |
| Maximum length | 3000 mm | 3000 mm |
| Maximum width | 1000 mm | 1000 mm |
| Further thicknesses | - | - |
| Cuttings | Yes | Yes |
| Magnetic available | Yes (from 3 sheets) | - |
| PVA treatment orderable | Please let us know when ordering | Please let us know when ordering |
| Special colors | On request | On request |
| EN13501-1 Flammability orderable | - | - |
| ASTM E84 Flammability orderable | - | - |
Accessories
| Accessories | Non Adhesive (NA) | Self Adhesive (SA) |
|---|---|---|
| Glue recommendation | Putty adhesive with toothed spatula A2 | not necessary |
| Matching Edges | - | - |
| Matching Profiles | - | - |
| Balance Sheet | HIPS white grained (Itemno. 25877) 2610x1010 mm | not necessary |
Cleaning
Do not use abrasive cleaners, solvent cleaners or pure alcohol! In case of light dirt by means of soft cleaning cloth (it should be free of dust and free of dirt). In case of heavy dirt by means of standard plastic or window cleaner (spray cleaners not onto the material surface, but sparingly onto the cleaning cloth).
