Description
```html
```
Product characteristics
| Product characteristic | Non adhesive (NA) | Self adhesive (SA) |
|---|---|---|
| Item number | 31663 | 31667 |
| Format | 2600x1000x1,5 mm | 2600x1000x1,7 mm |
| Surface material | PU-Leather (Polyurethane synthetic leather) | PU-Leather (Polyurethane synthetic leather) |
| Base material | HIPS (High impact polystyrene) | HIPS (High impact polystyrene) |
| Back side material | - | Adhesive Layer |
| Material thickness mm | 1,5 mm | 1,7 mm |
| Max. relief height in mm | 1,5 mm | 1,7 mm |
| Temperature stability in °C | up to 50 °C | up to 50 °C |
| Wet room suitability | Good wet room suitability | Good wet room suitability |
| Rolled packable Box (480x480 mm) | Rolled with decor side outward, max. 3 pcs/box. After receipt, rolled goods should be laid out flat for around 24 hours at room temperature and, if necessary, subjected to additional weight. | Rolled with decor side outward, max. 3 pcs/box. After receipt, rolled goods should be laid out flat for around 24 hours at room temperature and, if necessary, subjected to additional weight. |
| Smallest bending radius | 150 mm | 150 mm |
| Weight in kg / piece | 3,2 | 3,6 |
| Pattern Gradient | Please consider the design course | Please consider the design course |
| Flammability | EN 13501-1 Classification E | EN 13501-1 Classification E |
| Machine-related dimensional and angle tolerances | +/- 2.0 mm in relation to 1,000 mm | +/- 2.0 mm in relation to 1,000 mm |
| Temperature-related dimensional deviations | +/- 0.7 mm to 1,000 mm at temperature change of 10°C | +/- 0.7 mm to 1,000 mm at temperature change of 10°C |
| Protection foil | The product is delivered with a protective film | The product is delivered with a protective film |
| GTIN-Code | 9,00258E+12 | 9,00258E+12 |
| Customs tariff number | 39219060 | 39199080 |
Processing
| Processing | Non adhesive (NA) | Self adhesive (SA) |
|---|---|---|
| Cutting | - | - |
| Punching | - | - |
| Drilling | - | - |
| Sawing | - | - |
| Milling | - | - |
| Laser cutting | - | - |
| Hot bending |
Heat up the SIBU DESIGN sheets from the backside
for both internal and external angles.
Guideline values: wire temperature approx. 200°C, heating time approx. 6–17 seconds, depending on the surface material and the bending tool. - Outwardly (decor outside = external angle) is possible. - Inwards (decor side inside = interior angle) is possible, but wrinkles may appear along the internal angle. |
|
| PVA compressible | - | - |
Extra equipment
| Extra equipment | Non adhesive (NA) | Self adhesive (SA) |
|---|---|---|
| Special formats | On request | On request |
| Further thicknesses | - | - |
| Cuttings | - | - |
| Magnetic available | Yes (from 3 sheets) | Yes (from 3 sheets) |
| PVA treatment orderable | Please let us know when ordering | - |
| Special colors | - | - |
| Further variants | SIBUGLAS | SIBUGLAS |
| EN13501-1 Flammability orderable | - | - |
| ASTM E84 Flammability orderable | - | - |
Accessories
| Accessories | Non adhesive (NA) | Self adhesive (SA) |
|---|---|---|
| Glue recommendation | Putty adhesive with toothed spatula A2 | Not necessary |
| Matching Edges | - | - |
| Matching Profiles | - | - |
| Balance Sheet | HIPS white grained (Itemno.25877) 2610x1010 mm | Not necessary |
Cleaning
Do not use abrasive cleaners, solvent cleaners or pure alcohol! Clean leather surfaces by means of standard liquid soap and then remove the soap with a humid cloth.
Additional Info
Color variations are possible due to the manufacturing process and are no reason for complaint.
